Creating Incidents

Introduction

The following data elements are required for discipline incidents. State reportable incidents must be created at the school level via Special Functions. Non-state reportable incidents may be created at the student, school, or district level.

Incident types, as well as incident codes and subcodes, must be set up at the district level prior to creating discipline incidents. See District Setup.

Data Element	Additional Information	[Table]FieldName	Required
Entering Incident Details Start Page > Special Functions > Incident Management > Edit/Create New Incident > Incident Detail Note: Security groups must be granted access to Incident Types in order to create incidents. Review additional information about managing incidents.
Incident Description
Incident ID	This field is view-only and appears for existing incidents. The ID is populated automatically when the incident is first submitted.	[Incident]Incident_ID	Required Setup
School	The current school name appears. State reportable incidents must be created at the school level.	[Incident]School_Number	Required Setup
Incident Type	Choose the New Jersey incident types from the pop-up menu: STATE REPORTABLE (SSDS)^	[Incident_LU_Code]Code_Type=incidenttypecode [Incident_LU_Code]Incident_Category	Required Setup
Incident Date	Enter the date and time that the incident occurred.	[Incident]Incident_TS	Required Setup
Time Frame	Choose "Incident Time Frame" from the pop-up menu.	[Incident_LU_Code]Code_Type=timecode [Incident_LU_Code]Incident_Category	Required Setup
Time Frame Subcode	Choose the appropriate time frame subcode from the pop-up menu. For Example: Before School Hours During School Hours After School hours	N/A	Required Setup
Time Frame Comment	If applicable, enter a comment regarding the time frame.	[Incident_Detail]Lookup_Code_Desc	Optional Setup
Title	Enter a title for the incident.	[Incident]Incident_Title	Not Required
Description	Enter a description of the incident.	[Incident]Incident_Detail_Desc	Not Required
Location	Choose the location where the incident occurred from the pop-up menu: OFF SCHOOL GROUNDS^ ON SCHOOL GROUNDS^ BOTH ON AND OFF SCHOOL GROUNDS^	[Incident_LU_Code]Code_Type=locationcode [Incident_LU_Code]Incident_Category	Required Setup
Location Description	If applicable, enter the description of the location of the incident.	[Incident]Location_Details	Optional Setup
Prepared By	Not Required	N/A	Not Required
Financial Impact	Not Required	N/A	Not Required
Created By	The system-generated record of the person logged into PowerSchool who recorded the incident.	[Incident]Created_By	System Generated
Created On	The system-generated date and time that the incident was recorded in PowerSchool.	[Incident]Created_TS	System Generated
Building Discipline Incidents
Adding Students or Staff Members Incident Builder: Participants: Add Student or Staff Member Use the following steps to add participants to the incident. Click the Plus (+) button next to Participants. The Search for Student, Staff, or Other Participants dialog appears. Enter criteria for the search and click Search. The Results section is populated with matching participants. Highlight the appropriate participant in the search results and click Add.
Name	The full name, school, grade level, Gender, and type (student or staff member) of the participant. The identity of the participant is saved in PowerSchool. The name, school, grade level, Gender and type data are referenced from the student or staff member record.	[Incident_Person_Role]StudentID [Incident_Person_Role]TeacherID	Required Setup
Attributes	This field refers to participant attribute codes, which should be used if applicable	N/A	Optional
Attribute Subcodes	Choose an Attribute subcode from the pop-up menu.	N/A	Optional
Role	Choose the role that best describes the participant's involvement in the incident. Each incident must be associated with at least one offender. Valid values: Reporter Victim Offender Witness Note: In order to assign more than one role, click the Plus (+) button next to Select Role(s).	[Incident_Person_Role]Role_Incident_Detail_ID	Required Setup
Role Subcode	Role subcodes are required for Victim and offender only. See the Appendix for the correct values.		Required Setup
Adding Other Participants Incident Builder: Participants: Add Other Participant Use these steps to add a non-student/non-staff participant to the incident. Click the Plus (+) button next to Participants. The Search for Student, Staff, or Other Participants dialog appears. Click Create Other. The Add Other Participant dialog appears.
Mark Person as Unknown	Select the checkbox if the person is unknown.	[Incident_Other_Person]Is_Unknown	Not Required
First, Middle, Last	Enter the first, middle, and last names of the participant, if available.	[Incident_Other_Person]First_Name [Incident_Other_Person]Middle_Name [Incident_Other_Person]Last_Name	Required Setup
Position	Not Required	[Incident_Other_Person]Position	Not Required
Age	Not Required	[Incident_Other_Person]Age	Not Required
Gender	Enter the Gender of the participant, if available.	[Incident_Other_Person]Gender	Optional Setup
Role	Choose the role that best describes the participant's involvement in the incident. Each incident must be associated with at least one offender. Valid values: Reporter Victim Offender Witness Note: In order to assign more than one role, click the Plus (+) sign next to Select Role(s).	[Incident_Person_Role]Role_Incident_Detail_ID	Required Setup
Role Subcode	Choose a role subcode if the role code selected is Victim or offender.
Adding Actions Incident Elements: Add Action Use these steps to add a disciplinary action to the incident. Click the Plus (+) button next to Incident Elements. The Incident Elements dialog appears. Click Add Action. The Add Action dialog appears. Note: After you create an action in response to a behavior, you must drag the action to the behavior to associate the two elements. After the action is associated with the behavior, it no longer appears under the Incident Elements heading.
Action Code	Choose the action code from the pop-up menu: State Sanction Valid Values, State Remedial Program Values, and Law Enforcement Contract.	[Incident_LU_Code]Code_Type=actioncode [Incident_LU_Code]Incident_Category	Required Setup
Action Subcode	Choose the action subcode from the pop-up menu.	[Incident_LU_Sub_Code]Sub_Catetory [Incident_LU_Sub_Code]State_Detail_Report_Code	Required Setup
Duration Code	Choose the duration code of "Days" from the pop-up menu.	[Incident_Detail]LU_Code_ID [Incident_LU_Code]Code_Type=durationcode	Required Setup
Assigned Duration	Enter in the assigned duration		Required Setup
Actual Duration	Enter in the actual duration		Required Setup
Adding Behaviors Incident Elements: Add Behavior Use these steps to add behavior to the incident. Click the Plus (+) button next to Incident Elements. The Incident Elements dialog appears. Click Add Behavior. The Add Behavior dialog appears. Note: After you create a behavior for a participant, you must drag the behavior to the participant to associate the two elements.
Behavior Code	Choose the behavior code from the pop-up menu. Note: At least one behavior must be defined for each offender.	[Incident_LU_Code]Code_Type=behaviorcode [Incident_LU_Code]Incident_Category	Required Setup
Behavior Subcode	Choose a behavior subcode from the pop-up menu.	[Incident_LU_Sub_Code]Sub_Catetory [Incident_LU_Sub_Code]State_Detail_Report_Code	Required Setup
Behavior Code Comment	The comment box appears when a subcode for the Behavior Code > Misconduct-Illegal possession (Other) is selected.	[Incident_Detail]Lookup_Code_Desc	Required Setup
Adding Attributes Incident Elements: Add Attribute Click the Plus (+) button next to Incident Elements. The Incident Elements dialog appears. Click Add Attribute. The Add Attribute dialog appears.
Attribute Code	Select the checkbox for Against Property Indicator if applicable. All other attribute codes are not required.	[Incident_LU_Code]Code_Type=attributecode [Incident_LU_Code]Incident_Category	Required Setup

Back to Top

Introduction

Entering Incident Details

Building Discipline Incidents

Adding Students or Staff Members

Adding Other Participants

Adding Actions

Adding Behaviors

Adding Attributes